Kitchen sink drains slow or stands full of water
We run a camera to find the clog, then hydro jet the line. The high-pressure water removes grease and food particles. Most sinks drain normally within an hour. We also check the p-trap for leaks.
High-pressure drain cleaning for kitchen sinks that keep backing up
Hydro Jetting in Melrose Park, Illinois That Clears the Line for Good
When your kitchen sink drains slow or stands full of water, hydro jetting in Melrose Park, Illinois scours the pipe wall clean instead of just poking a hole through the clog. We handle grease, food particles, and soap scum in homes and restaurants across Melrose Park. One call, and we restore full flow.
Fast online booking
Request service today
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now 7087265955 → No spam. No obligation. Just practical help.
Careful work. Honest options.
About this service
What Hydro Jetting in Melrose Park, Illinois Actually Does
Hydro jetting in Melrose Park, Illinois is a drain cleaning method that uses a high-pressure water stream, usually 3,000 to 4,000 PSI, to strip grease, sludge, and scale off the inside of your drain pipe. A flexible hose with a forward and rear-facing nozzle goes into the line through the p-trap or a cleanout. The water blasts the clog apart and flushes the debris away, so the pipe comes back to close to its original diameter.
Most Melrose Park calls we run start the same way: a slow draining sink that turns into standing water after a few days. Older homes near Broadway Avenue and 25th Avenue often have decades of grease clog and soap scum buildup lining the pipe. A plunger or drain snake punches a channel through that gunk, and the clog returns in weeks. Hydro jetting removes the buildup itself, which is why we recommend it for recurring kitchen sink clogs and main sewer line issues.
- ✓ Clears the Whole Pipe
- ✓ Safe for Most Pipes
- ✓ No Harsh Chemicals
- ✓ Handles Grease and Scale
What's included
What Our Hydro Jetting Service Includes
Every hydro jetting job includes a camera inspection, the jetting itself, and a post-service flow test. We also clean up and walk you through what we found. Here is what is covered.
✓
Drain Camera Inspection
We run a drain camera down the line before we jet. You see the footage on our monitor. This tells us the clog type, pipe material, and any damage. It takes 10 to 15 minutes.
✓
High-Pressure Jetting
We use a hydro jetting machine at 3,000 to 4,000 PSI to scour the pipe walls. The nozzle pulls itself through the line, blasting grease, sludge, and scale. Most kitchen sinks clear in 20 to 40 minutes.
✓
Post-Service Camera Check
After jetting, we run the camera again to confirm the pipe is clean. You see the before and after. If we spot a p-trap leak or crack, we show you and explain your options.
✓
Flow Test
We fill the sink and let it drain. We run the garbage disposal unit and dishwasher drain line. This confirms everything flows properly. We do not leave until we know the line is clear.
✓
Cleanup
We put down drop cloths before we start. After we finish, we clean up the work area and put the p-trap back. We haul away any debris. Your kitchen is left as we found it, just with a working drain.
How it works
Our Hydro Jetting Process, Step by Step
01
Inspection
We pull the p-trap or open the cleanout and run a drain camera down the line. You see the footage on the monitor. We identify the clog type, pipe material, and any cracks or root intrusion. This takes 10 to 15 minutes and tells us the right pressure to use.
02
Setup
We lay down drop cloths, put on gloves, and position the hydro jetting machine near the cleanout or sink opening. We check the pipe sealant and connections to make sure the line can handle the pressure. Setup takes about 10 minutes.
03
Jetting
We feed the hose into the line and start the water. The nozzle pulls itself forward, blasting grease, sludge, and scale off the pipe walls. Most kitchen sink lines clear in 20 to 40 minutes. Main sewer lines can take 45 to 60 minutes.
04
Camera Check
After jetting, we run the drain camera again to confirm the pipe is clean. You see the before and after on screen. If we spot a p-trap leak or a cracked section, we show you and explain your options before we leave.
05
Flow Test
We fill the sink and let it drain. We run the garbage disposal unit and the dishwasher drain line to make sure everything flows. Then we clean up, put the p-trap back, and walk you through what we found.
Tools & methods
Tools and Methods We Use for Hydro Jetting
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Hydro Jetting Machine
We use Spartan Tool and General Pipe Cleaners hydro jetting machines. They deliver 3,000 to 4,000 PSI of water pressure to scour the pipe walls. We adjust the pressure based on pipe material and condition.
Drain Camera
We use RIDGID drain cameras to inspect the line before and after jetting. You see the footage on our monitor. This helps us find the clog and confirm the pipe is clean.
Drain Snake and Auger
For clogs close to the sink, we use a drain snake or auger. We carry RIDGID and Milwaukee augers. If the clog is deeper, we switch to hydro jetting.
Pipe Wrench and Plumber's Tape
We use a pipe wrench to remove the p-trap and access the drain line. We use plumber's tape on threaded connections to prevent leaks when we put it back.
Bucket and Gloves
We place a bucket under the p-trap to catch water and debris. We wear gloves to keep the job clean and safe. We also use drop cloths to protect your floor.
Real results
Before and after.
Grease Clog in a Melrose Park Home
Before
A homeowner on 19th Avenue had a kitchen sink that drained slow for months. Plunging helped for a day or two. The sink was full of standing water. We ran a camera and found a thick grease clog lining the pipe.
After
We hydro jetted the line at 3,500 PSI. The grease clog broke apart and flushed away. The camera showed a clean pipe. The sink now drains in seconds. The job took 45 minutes.
Restaurant Kitchen Drain Backup
Before
A restaurant in Melrose Park Industrial Park had a kitchen drain that backed up during dinner service. Grease and food particles had built up over months. The staff was using a plunger between orders.
After
We hydro jetted the line after closing. The grease and food particles flushed out. We ran a camera to confirm the line was clear. The restaurant has not had a backup since. We set up quarterly maintenance.
Main Sewer Line Clog from Roots
Before
A home in Winston Park had sewage backing up into the basement. The homeowner called us on a Sunday. We ran a camera and found roots intruding into the main sewer line. The line was partially blocked.
After
We hydro jetted the line to cut through the roots. The water flowed freely. We ran the camera again to confirm. The backup stopped. We recommended a follow-up to address the root intrusion.
Problems we solve
Problems Hydro Jetting Solves for Melrose Park Homes
Hydro jetting is the right fix for recurring clogs, grease buildup, and slow drains that snaking cannot solve. Here are the most common problems we see in Melrose Park.
Ask a pro →↗
Recurring clogs after snaking
Hydro jetting scours the entire pipe wall, removing the grease and sludge that snaking leaves behind. This is why we recommend hydro jetting for recurring clogs. It fixes the cause, not just the symptom.
Grease clog in a restaurant kitchen
We offer commercial hydro jetting for restaurants in Melrose Park. We work after hours to avoid disrupting your business. We can also set up a maintenance schedule to prevent future clogs.
Main sewer line clog causing backups
We hydro jet main sewer lines to remove grease, roots, and scale. We run a camera before and after to confirm the line is clear. If we find root intrusion, we can recommend the right repair.
Most residential kitchen sink hydro jetting jobs in Melrose Park run $250 to $450 in 2026. Main sewer line jetting can run $400 to $850 depending on length and access. We quote you a flat price before we start. If you need affordable hydro jetting melrose park il Illinois, call us for a quote over the phone.
Hydro jet drain cleaning uses high-pressure water, typically 3,000 to 4,000 PSI, to scour the inside of your drain pipe. A hose with a special nozzle goes into the line and blasts away grease, sludge, and scale. It is different from snaking because it cleans the whole pipe wall, not just a channel through the clog.
Yes, for most pipes in good condition. We run a drain camera first to check pipe material and look for cracks or root intrusion. If your pipes are clay, cast iron, or PVC and structurally sound, hydro jetting is safe. If we find damage, we adjust the pressure or recommend a repair before jetting.
For a home kitchen sink, once every 12 to 18 months is typical if you cook often or have a history of grease clogs. Restaurants and commercial kitchens in Melrose Park usually need it every 3 to 6 months. If your sink drains slow again within a few weeks, that is a sign you need jetting more often.
More services
Related Services
Drain CleaningHydro jetting is one of our drain cleaning methods. We also snake and auger lines. If you have a slow drain anywhere in the house, we find the cause and fix it. We work on kitchen, bath, and floor drains.Explore →
Drain SnakingA drain snake is the right tool for some clogs, especially those close to the p-trap. We use RIDGID and Milwaukee augers to break through blockages. If snaking does not clear it, we move to hydro jetting.Explore →
Sink Drain RepairIf hydro jetting reveals a cracked or corroded drain pipe, we repair it. We replace p-traps, tailpieces, and drain lines. We use pipe sealant and plumber's tape to make sure the repair holds.Explore →
Garbage Disposal UncloggingA jammed garbage disposal unit can stop your whole sink from draining. We clear the jam, reset the unit, and check the drain line. If the disposal is beyond repair, we can replace it.Explore →
Garbage Disposal RepairIf your disposal hums but does not drain, or leaks from the bottom, we repair it. We carry common parts and can often fix it in one visit. If it is time for a new one, we install that too.Explore →
Garbage Disposal InstallationWe install new garbage disposal units and connect them to your drain line. We make sure the dishwasher drain line is properly connected and the p-trap is sealed. Most installs take under two hours.Explore →
P-Trap Cleaning and ReplacementThe p-trap is where clogs often start. We remove it, clean it out, and check for leaks. If it is corroded or cracked, we replace it with a new one. We use plumber's tape on the threads to prevent leaks.Explore → Ready when you are
Need Hydro Jetting in Melrose Park, Illinois? Call Now.
We are licensed, insured, and ready to clear your drain today. Same-day and emergency service available. One call and we will be on our way.
Call Now 7087265955 →
Request an appointment
Call for kitchen sink unclogging
Call 708-726-5955 any time, day or night. We answer the phone, give you a time window, and send a licensed tech with a snake, auger, and jetting equipment. Most kitchen sink clogs clear the same day you call.